MULTITV UPGRADE AND NEW FREQUENCY
Joytv did a digital upgrade and their signal went off on their former frequency which is (12522 V 2700) However, you can now get virtually all channels on multitv on 12525 V 30000. You can rescan the decoder with the above frequency and receive your multitv channels back.
HOW TO GET TV3 BACK ON MULTITV USING SUPPORTED DECODERS
If after blindscanning with 12525 V 30000 you receive tv3 but it is not opening, please perform the followings:
- Simply factory reset decoder
- Make sure you are not having multiple entries of TV3 channels. I mean delete every other tv3 you have apart from the one with the above frequency.
- Blind Scan and wait patiently to have all channels fully restored.
- TV3 NOT WORKING?
Delete and re-inputing the BISS KEYS below.. Also make sure that the frequency under tv3 biss keys tallies with 12525 V 30000.
9E 37 79 4E B9 7F 4A 82 - Read the following articles on how to insert biss keys on qsat, strong decoder and so on:this, read this and also this
If your TV3 was working before on alphabox just change the SID to 0077 and you are done
HOW TO GET THE CHANNELS BACK ON MUTITV OFFICIAL DECODER?
Follow the appropriate steps to re-scan your Multi TV Decoder if it does not scan
automatically
automatically
SYNDICATED
MULTI TV HD II/ HD PLUS
1. PRESS THE MENU KEY ON THE REMOTE CONTROL.
2. PRESS THE SIDE POSITIVE VOLUME KEY >+ TO SELECT INSTALLATION AND PRESS OK.
3. SCROLL DOWN BY USING THE DOWN CHANNEL KEY (CH-) TO SELECT MANUAL SEARCH AND PRESS OK
4. SCROLL DOWN TO SELECT SYMBOL RATE
5. USE THE NUMBERS ON THE REMOTE CONTROL TO ENTER SYMBOL RATE NUMBER 30000
6. PRESS THE BLUE KEY ON THE REMOTE CONTROL TO SCAN OR TO SEARCH.
7. 10. PRESS EXIT ON THE REMOTE CONTROL TO EXIT TO START WATCHING YOUR CHANNELS
MULTI TV HD II/ HD PLUS
1. PRESS THE MENU KEY ON THE REMOTE CONTROL.
2. PRESS THE SIDE POSITIVE VOLUME KEY >+ TO SELECT INSTALLATION AND PRESS OK.
3. SCROLL DOWN BY USING THE DOWN CHANNEL KEY (CH-) TO SELECT MANUAL SEARCH AND PRESS OK
4. SCROLL DOWN TO SELECT SYMBOL RATE
5. USE THE NUMBERS ON THE REMOTE CONTROL TO ENTER SYMBOL RATE NUMBER 30000
6. PRESS THE BLUE KEY ON THE REMOTE CONTROL TO SCAN OR TO SEARCH.
7. 10. PRESS EXIT ON THE REMOTE CONTROL TO EXIT TO START WATCHING YOUR CHANNELS
DIGITAL COMBO DECODER VI/COMBO DECODER T2/S2
1. PRESS THE MENU KEY ON THE REMOTE CONTROL.
2. PRESS THE SIDE VOLUME KEY >+ TO SELECT INSTALLATION AND PRESS OK.
3. USE CHANNEL KEY UP AND DOWN(CH+/CH-) TO SELECT OR HIGHLIGHT SATELLITE SETUP AND PRESS OK
4. SCROLL DOWN BY USING THE DOWN CHANNEL KEY (CH-) TO SELECT MANUAL SEARCH AND PRESS OK
5. SCROLL DOWN TO SELECT SYMBOL RATE
6. USE THE NUMBERS ON THE REMOTE CONTROL TO ENTER SYMBOL RATE NUMBER 30000
7. PRESS THE BLUE KEY ON THE REMOTE CONTROL TO SCAN OR TO START SEARCH.
8. AFTER SEARCHING, PRESS EXIT ON THE REMOTE CONTROL TO EXIT TO START WATCHING YOUR CHANNELS.
1. PRESS THE MENU KEY ON THE REMOTE CONTROL.
2. PRESS THE SIDE VOLUME KEY >+ TO SELECT INSTALLATION AND PRESS OK.
3. USE CHANNEL KEY UP AND DOWN(CH+/CH-) TO SELECT OR HIGHLIGHT SATELLITE SETUP AND PRESS OK
4. SCROLL DOWN BY USING THE DOWN CHANNEL KEY (CH-) TO SELECT MANUAL SEARCH AND PRESS OK
5. SCROLL DOWN TO SELECT SYMBOL RATE
6. USE THE NUMBERS ON THE REMOTE CONTROL TO ENTER SYMBOL RATE NUMBER 30000
7. PRESS THE BLUE KEY ON THE REMOTE CONTROL TO SCAN OR TO START SEARCH.
8. AFTER SEARCHING, PRESS EXIT ON THE REMOTE CONTROL TO EXIT TO START WATCHING YOUR CHANNELS.
CA PLUS SERIES 2/SC 101 S2/MULTI TV HD
1. PRESS MENU ON THE REMOTE CONTROL AND PRESS THE POSITIVE VOLUME KEY (>
+) TO SELLECT INSTALLATION
2. SELLECT OR HIGHLIGHT DISH SETTINGS BY USING CHANNEL UP AND DOWN KEY (CH-/CH+) AND PRESS OK
3. ENTER THE DEFAULT PASSWORD (0000) TO OPEN
4. PRESS THE YELLOW KEY (Edit TP) ON THE REMOTE A PAGE WILL OPEN
5. SCROLL DOWN TO SYMBOL RATE AND ENTER THE SYMBOL RATE NUMBER 30000
6. SCROLL DOWN TO SELECT YES AND PRESS OK TO SAVE
7. SCROLL DOWN TO SELECT SERVIC SEARCH AND PRESS OK A PAGE WILL OPEN
8. SCROLL UP AND DOWN TO HIGHLIGHT SEARCH MODE BY USING CHANNEL UP AND DOWN KEY(CH-/CH+)
9. PRESS POSITVE VOLUME KEY >+ TO CHANGE FROM AUTO TO MANUAL
10. PRESS CHANNEL UP AND DOWNKEY TO SCROLL TO START SEARCH AND PRESS OK TO SCAN.
11. PRESS MENU OR EXIT, A PAGE WILL DISPLAY
12. PRESS NEGATIVE VOLUME KEY (- +) TO SELECT INSTALLATION
2. SCROLL UP AND DOWN TO HIGHLIGHT DVB-S AND PRESS OK
3. ENTER DEFAULT PASSWORD (0000) TO OPEN.
4. SCROLL UP AND DOWN TO HIGHLIGHT DISH SETTING AND PRESS OK
5. PRESS THE YELLOW KEY (Edit TP) ON THE REMOTE A PAGE WILL OPEN
6. SCROLL DOWN TO SYMBOL RATE AND ENTER THE SYMBOL RATE NUMBER 30000
7. SCROLL DOWN TO SELECT YES AND PRESS OK TO SAVE
8. SCROLL DOWN TO SELECT SERVIC SEARCH AND PRESS OK A PAGE WILL OPEN
9. SCROLL UP AND DOWN TO HIGHLIGHT SEARCH MODE BY USING CHANNEL UP AND DOWN KEY(CH-/CH+)
10. PRESS POSITVE VOLUME KEY >+ TO CHANGE FROM AUTO TO MANUAL
11. PRESS CHANNEL UP AND DOWNKEY TO SCROLL TO START SEARCHAND PRESS OK TO SCAN.
12. PRESS MENU OR EXIT, A PAGE WILL DISPLAY
13. PRESS NEGATIVE VOLUME KEY (- PRESS OK
INFORMATION WILL POP UP REQUESTING TO “SEARCH ONLY FTA CHANNELS”? ==>
PRESS OK TO START SCANNING MULTI TV CHANNELS.
PRESS EXIT BUTTON 3 TIMES TO BEGIN TO VIEW YOUR SCANNED CHANNELS.
1. PRESS MENU ON THE REMOTE CONTROL AND PRESS THE POSITIVE VOLUME KEY (>
+) TO SELLECT INSTALLATION
2. SELLECT OR HIGHLIGHT DISH SETTINGS BY USING CHANNEL UP AND DOWN KEY (CH-/CH+) AND PRESS OK
3. ENTER THE DEFAULT PASSWORD (0000) TO OPEN
4. PRESS THE YELLOW KEY (Edit TP) ON THE REMOTE A PAGE WILL OPEN
5. SCROLL DOWN TO SYMBOL RATE AND ENTER THE SYMBOL RATE NUMBER 30000
6. SCROLL DOWN TO SELECT YES AND PRESS OK TO SAVE
7. SCROLL DOWN TO SELECT SERVIC SEARCH AND PRESS OK A PAGE WILL OPEN
8. SCROLL UP AND DOWN TO HIGHLIGHT SEARCH MODE BY USING CHANNEL UP AND DOWN KEY(CH-/CH+)
9. PRESS POSITVE VOLUME KEY >+ TO CHANGE FROM AUTO TO MANUAL
10. PRESS CHANNEL UP AND DOWNKEY TO SCROLL TO START SEARCH AND PRESS OK TO SCAN.
11. PRESS MENU OR EXIT, A PAGE WILL DISPLAY
12. PRESS NEGATIVE VOLUME KEY (- +) TO SELECT INSTALLATION
2. SCROLL UP AND DOWN TO HIGHLIGHT DVB-S AND PRESS OK
3. ENTER DEFAULT PASSWORD (0000) TO OPEN.
4. SCROLL UP AND DOWN TO HIGHLIGHT DISH SETTING AND PRESS OK
5. PRESS THE YELLOW KEY (Edit TP) ON THE REMOTE A PAGE WILL OPEN
6. SCROLL DOWN TO SYMBOL RATE AND ENTER THE SYMBOL RATE NUMBER 30000
7. SCROLL DOWN TO SELECT YES AND PRESS OK TO SAVE
8. SCROLL DOWN TO SELECT SERVIC SEARCH AND PRESS OK A PAGE WILL OPEN
9. SCROLL UP AND DOWN TO HIGHLIGHT SEARCH MODE BY USING CHANNEL UP AND DOWN KEY(CH-/CH+)
10. PRESS POSITVE VOLUME KEY >+ TO CHANGE FROM AUTO TO MANUAL
11. PRESS CHANNEL UP AND DOWNKEY TO SCROLL TO START SEARCHAND PRESS OK TO SCAN.
12. PRESS MENU OR EXIT, A PAGE WILL DISPLAY
13. PRESS NEGATIVE VOLUME KEY (- PRESS OK
INFORMATION WILL POP UP REQUESTING TO “SEARCH ONLY FTA CHANNELS”? ==>
PRESS OK TO START SCANNING MULTI TV CHANNELS.
PRESS EXIT BUTTON 3 TIMES TO BEGIN TO VIEW YOUR SCANNED CHANNELS.
